Local Property Group 07784 043887

LPG Flooring · Ongar

Herringbone Engineered Wood Flooring in Ongar

From £140/m² (up to £240/m²)

A real engineered-oak herringbone floor is the single best return-on-investment upgrade we install across London, Essex and the Home Counties. Properly fitted in a Chigwell Edwardian semi or a Buckhurst Hill period townhouse, it adds visible value to the property and reads as built-in rather than chosen. We fit only multi-layer engineered boards (3-ply or 5-ply construction, minimum 4mm oak wear layer) · never solid wood, because solid wood and modern underfloor heating are a warranty claim waiting to happen. Every herringbone job is bonded with a flexible MS-polymer adhesive, expansion-jointed correctly, and hand-finished at the perimeter. We stock samples from Ted Todd, Woodpecker and V4.

Wide-plank engineered oak and herringbone suit Ongar’s newer executive homes · in the older village stock we check the floor build-up before promising anything. Chipping Ongar (CM5) and its satellite villages · High Ongar, Fyfield, Moreton and the Rodings · sit between Epping and Brentwood in proper commuter-belt countryside. The High Street keeps its Georgian and older timber-framed fabric, while the lanes carry farmhouses, cottages and generous modern plot builds. Older CM5 properties need the same care as Abridge: solid floors of unknown build-up, occasional lime construction, and cottage staircases that are rarely square, which makes hand-cut carpet and scribed wood the only honest way to fit. Newer executive homes around Love Lane and Shakletons take wide-plank engineered oak and deep wool carpets. Around 20 minutes from the workshop via the A414.

Warranty: 25-year structural warranty (engineered board) + 5-year LPG fitting guarantee · Postcodes: CM5

WhatsApp for a Quote Call Us

How we fit herringbone in Ongar

  1. Step 1. Survey: moisture readings, SR-level assessment, structural check of the joists (suspended floors only), sample drop-off from Ted Todd, Woodpecker and V4 ranges.
  2. Step 2. Subfloor prep: latex screed to SR2 minimum on concrete, 18mm WBP ply overlay on suspended timber floors, DPM if RH readings demand it.
  3. Step 3. Acclimatisation: engineered boards conditioned in your home for 5–7 days minimum · non-negotiable for herringbone, because a 0.5% dimensional shift across a 60m² floor is visible.
  4. Step 4. Bonded installation: MS-polymer adhesive trowelled in 4–6m² zones, boards set with a centre-line laser, perimeter expansion gap maintained at 12–15mm under skirtings or scotia.
  5. Step 5. Finishing: hand-scribed to fireplaces and bay windows, scotia or skirting reinstated, two coats of compatible hard-wax oil or lacquer if site-finished, full clean and care pack supplied.

Frequently asked questions

How much does herringbone wood flooring cost in Ongar?

Supplied and fitted, engineered oak herringbone starts at £140/m² in Ongar · that covers a quality 14mm 4-ply board with a 4mm oak wear layer, lacquered or oiled, fitted bonded over a prepared subfloor. Smoked or fumed oak ranges run £175–210/m², and chevron (the steeper, more formal cut) is £195+/m². Subfloor preparation is itemised separately on the quote.

Can I have herringbone over underfloor heating?

Yes · engineered herringbone is the only wood floor we fit over UFH. We use boards rated for thermal cycling (typically 3-ply construction with a balanced backing), bond them with a UFH-compatible MS-polymer adhesive, and commission the heating with a slow 7-day ramp-up. Solid herringbone over UFH will cup, gap and crack · we do not fit it under any circumstances and any installer who does is voiding the manufacturer warranty.

Engineered or solid herringbone · which is right for my Ongar home?

For a Ongar home with modern heating, engineered every time. A quality 4-ply engineered board with a 4mm oak wear layer can be sanded and refinished 2–3 times over 40 years, gives you UFH compatibility, holds dimension across British seasonal humidity swings, and costs less. Solid herringbone is a heritage-spec product for unheated period properties · beautiful, but the wrong tool for a normal family home.

How long does a herringbone installation take?

A typical 30m² living room or hallway in Ongar runs 5 working days end-to-end: 1 day prep, 5–7 days acclimatisation (running in parallel), 2–3 days laying, 1 day finishing and skirting reinstatement. Larger open-plan jobs over 60m² typically take 8–10 working days. We give you a Gantt-style plan up front so you know which rooms are off-limits each day.

Do you do chevron as well as herringbone?

Yes. Chevron is the V-cut version · every plank is mitred at 45° or 60° at the factory so the points meet on a true centre line, giving a sharper, more formal pattern than the rectangular herringbone. It is roughly 30% more expensive in the board itself and slightly more demanding to fit because the centre line has zero tolerance. We have fitted chevron in Chigwell and Buckhurst Hill homes · happy to drop samples.

Also available nearby

Herringbone in LoughtonHerringbone in ChigwellHerringbone in Buckhurst HillHerringbone in EppingHerringbone in Theydon BoisHerringbone in Woodford GreenHerringbone in WansteadHerringbone in South WoodfordHerringbone in ChingfordHerringbone in AbridgeHerringbone in Brentwood & Shenfield